Adhesive dispenser Pneumatic or semi-automatic filler

Liquid Glue Dispenser Pneumatic and Semi-Automatic Filler

 

Machine for dosing glues manually or automatically with timer, it has a pedal, with this machine you can have more precise results, better finishes in your pieces and an increase in production, the useful life of this machine is up to ? years, it has an anti-drip system. Designed for a wide range of applications such as EFD, I&J Fisnar.

Complete with accessory dosing kit.

Timer mode dosing time 0.01-99.99 seconds.

Timer mode cycle time 0.1-9.9 seconds.

Manual mode, materials can be dispensed continuously until the operator releases the pedal.

This adhesive dispenser must be connected to air compressor (1.5 HP or higher).

He adhesive dispenser Professional, Precise adopts the latest digital control system,

1. Dispensing type: Free to set 16 kinds of shapes, with dispensing time display

2. Automatic timer dosing: 00.01S-99.99S

3. Manual timing dosing: You can dispense the coating, or in continuous line

4. Minimum adhesive dosage: 0.0001 ml

5. Dosing time range: 0.1-9.9S (automatic timing function)

6. Input voltage: 220V -10% 50Hz / 110V -10% 60Hz (220V for Europe;110V for America, etc.)

7. Internal voltage: 12V DC / 24V DC

8. Inlet air pressure: 10-100pSi

9. Output air pressure: 1-80pSi

10. Overall dimension: 235*225*63mm

11. Net weight: 2.2 Kg

1. Power switch: the placement light shows “On”, the off light shows “Off”

2. Display of dispensing time: Setting time on the screen

3. Inlet air pressure regulator: First pull out, reversal is lower pressure, ventilation is higher pressure

4. Barometer: Display range: 0-100pSi

5. Vacuum control unit: Reversing is high vacuum pump, speed is low vacuum pump

6. Test button: During testing, you can replace the foot switch

7. Dispensing time dial code button: Display the setting time, adopts the form of adding and subtracting 00.01S-99.99S

8. Time interval setting dial code button: Display setting time, adopts add and subtract form 0.1S-9.9S

9. Dosing output interface: Connect to the dispensing needle barrel.

10. Air pressure input interface: Connect to clean high pressure source (compressor)

11. Dispensing method: 16 kinds of free

12. Foot controller interface: Connect to the foot switch

13. Power input socket

14. Rifle holder

CONTENT:

1 adhesive dispensing machine

1 Foot switch

1 Hand switch

1 Dispenser holder

2 30 cc liquid syringes

1 Air tube to syringe

1 Air tube to air source

1 Steel and plastic needle set

1 Power cable

In this video you can see the operation of the machine